02 3D Model Configuration
This tool does not apply engineering rules to model code combinations. Engineering rules will be applied at time of order. Sequences that do not affect the external appearance of the model may not be displayed.
- Sequence 1 product MOTOR M 1
- Sequence 2 series 2000 SERIES 02 2
- Sequence 3 displacement 393.8 CM3/R [24.03 IN3/R] 3
- Sequence 4 mounting type STANDARD (MAGNETO), 4 BOLT; 82.6 [3.25] PILOT DIA. 13.59 [.535] DIA. HOLES ON 106.4 [4.19] DIA. BOLT CIRCLE. 2.79 [.110] PILOT LENGTH 4
- Sequence 5 output shaft 31.75 [1.250] DIA. STRAIGHT SHAFT WITH (1.78 [.070] WIDE) RETAINING RING AND .625-18UNF-2B THREAD IN END, 7.938 [.3125] SQ X 31.75 [1.250] STRAIGHT KEY 5
- Sequence 6 ports .875-14 UNF-2B SAE O-RING PORTS - STAGGERED PORTS 6
- Sequence 7 case flow option .4375-20 UNF-2B SAE O-RING PORT 7
- Sequence 8 low pressure relief NONE 8
- Sequence 9 pressure flow option NONE 9
- Sequence 10 geroler option STANDARD 10
- Sequence 11 seal option STANDARD 11
- Sequence 12 accessories NONE 12
- Sequence 13 special features (hardware) NONE 13
- Sequence 14 special features (assembly) NONE 14
- Sequence 15 paint/packaging NO PAINT, INDIVIDUAL BOX 15
- Sequence 16 customer identification NONE AA 16
- Sequence 17 design code SIXTH F 17
- Blank Blank Blank
View and Download
Make sequence selections in order of most important to least to find a single 3D model. Only visually distinguishable features are available for configuration, features not relevant to 3D modeling have been omitted.
No models are available for your selections. Select the no preference option on sequences starting with least important until a model becomes available.